Ames-fire-waterworks 930GS Stainless Steel Solenoid (On-Off) Control Va Bedienungsanleitung PDF herunterladen

01/06

930 Series

Model

8550 Hansen Road • Houston, Texas 77075 • (Ph) 713.943.0688 • (Fx) 713.944.9445 • www.amesrewater.com

SOLENOID CONTROL VALVE

(4” and Smaller)

930

630

930 link

Operation

The AMES Model 930 / 630 Solenoid On-Off Control Valve is designed to open fully or close drip-tight as

commanded by the 3-Way Solenoid Pilot. The Solenoid Pilot commands the routing of uid and pressure

into and out of the cover chamber of the main valve. When the Solenoid Pilot connects the cover chamber

of the valve to upstream pressure, the valve closes drip tight. When the Solenoid Pilot connects the cover

chamber of the valve to downstream pressure (dry drain) or atmosphere (wet drain), the valve opens fully.

Engaging the Solenoid Manual operator simulates power to the solenoid, manually controlling the main

valve. Disengaging the Solenoid Manual operator returns the valve to electrical on-off service.

Specify voltage and MAIN VALVE actuation (energize to open or close), and “wet” or “dry” drain

PRIOR to ordering.

Installation Guidelines

• Prior to installation, ush line to remove debris.

• Install valve horizontally “in line” (cover facing UP), so ow arrow matches ow through the line. Avoid

installing valves 6” and larger vertically. Consult factory prior to ordering if installation is other than

described.

• Install inlet and outlet isolation valves. NOTE: When using buttery valves, insure disc does not contact

control valve. Damage or improper valve seating may occur.

• Provide adequate clearance for valve servicing and maintenance.

• Install pressure gauges to monitor valve inlet and outlet pressure.

• Provide adequate drain for cover chamber discharge if “wet drain” option is selected. Consult “Valve

Cover Capacity” chart on appropriate main valve Engineering Bulletin.

• Connect Solenoid Pilot to appropriate power source in compliance with local electrical codes.

Other AMES Solenoid Control Valves

930-01 / 630-01 Solenoid (On-Off) Valve with Hydraulic Check Feature (4” & smaller)

930-19 / 630-19 Solenoid (On-Off) Valve (6” & larger)

930-01-19 / 630-01-19 Solenoid (On-Off) Valve with Hydraulic Check Feature (6” & larger)

933 / 633 Dual Solenoid Control Valve (for Electronic Positioning)

01/06930 SeriesModel8550 Hansen Road • Houston, Texas 77075 • (Ph) 713.943.0688 • (Fx) 713.944.9445 • www.amesrewater.comSOLENOID CONTROL VAL

Keine Kommentare

Ames-fire-waterworks 930GS Stainless Steel Solenoid (On-Off) Control Va Bedienungsanleitung